The Mistakes to Avoid During the Installation of a Dry Fire Detection System

One of the biggest tragedies that can happen to a commercial building is fire damage. A small electrical fault can raze down property worth millions in minutes and even lead to injuries and loss of life. The best way to prevent these sad events is by installing fire detection systems. Dry fire detection systems are different from the regular fire alarm, and for them to be effective, you must follow the manufacturer's instructions during the installation. Here are three mistakes which you must avoid during the installation of dry fire detectors.

Setting the Pressure Too Low

The dry fire detection system is designed with a pressure switch as the main detector. When a fire breaks out inside a room, the atmospheric pressure changes. It is this change in pressure that triggers the pressure detector. When you set the pressure detector too low, you end up with a system which cannot tell that a fire has started. Ideally, you should set the pressure between two and four bars. As the fire spreads inside a house and the pressure drops, the detector is triggered and the water sprinkler turns on, which puts out the fire.

Over-relying on Heat and Smoke Detection

Another common setting in dry fire detection systems is smoke and heat detection. The mistake that building managers make when installing the devices is that they choose one of the two settings as opposed to having both. When a fire starts and the detector is set to heat detection alone, it might take time for the sensor to tell the temperature change. Having the smoke setting on will help the sensor detect fire and put it out on time. 

Forgetting Nitrogen Leak Detectors

Fire detection systems extract nitrogen from the surrounding area. There are others that get this nitrogen from pressurized containers. When installing the second type, you have to ensure that you perform maintenance checks on them regularly. This is because if you do not and the detector runs out of nitrogen or the nitrogen in the system leaks, its effectiveness becomes compromised.

It is crucial to note that if your systems are installed incorrectly and your building is burned down in a fire accident, you might have a hard time getting compensation from insurers. This is because incorrect installation of detectors counts as negligence on your part. Get the best dry fire detectors and have them installed by experts to avoid regrettable fire incidents. For more information about dry fire detection systems, contact a professional near you.